How to set up an Enigma2 receiver
On Enigma2 receivers, we send you a ready-made command that adds your IPTV PRINCE channel lists. You run it once from a computer on the same network.
Before you start
Your personal command
Ask us on WhatsApp or Telegram. We send a command made for your subscription.
A computer on the same network
On Windows, a free program such as PuTTY. On Mac or Linux, the built-in Terminal.
Your receiver’s IP address
You find it in the receiver’s network settings or information menu.
Set up your Enigma2 receiver
Find the IP address
On the receiver, open the network settings or the information menu and note its IP address, for example 192.168.1.20.
Connect from your computer
Open PuTTY or Terminal and connect to that IP address with Telnet or SSH, depending on what your receiver’s image supports.
Log in
Log in as root, with the password you set on the receiver, if any.
Run the command
Paste the command we sent you and press Enter. Wait until it finishes.
Restart
Restart the receiver or its interface. Your IPTV PRINCE lists appear in the channel list.
Only run commands you received directly from our team. Your command contains your personal access, so do not share it.
Common problems
The connection is refused.
Check the IP address and that the computer and receiver are on the same network. Some images only allow SSH, others only Telnet: try the other one.
The lists do not appear after the command.
Restart the receiver completely. If they are still missing, send us a photo of the message shown after the command.
Do I need a new command after renewing?
Usually not. If your lists stop working after a renewal, message us and we send an updated command.
Need a hand with setup?
Send us your receiver model and we guide you step by step, 24/7.